Like all types of mold, black mold is commonly found in dark, humid areas of the home. If your Central Florida home is damaged by water, mold can begin to grow and spread within 24 to 48 hours. In doing so, it releases spores into the air that can be inhaled or absorbed through the skin. These spores also travel frequently on clothes, causing them to unknowingly spread throughout the house.
Mold and mildew can develop 24 to 48 hours after exposure to water, so act right away to clean things up and make your home dry again. The sooner you take action, the more you can contain potential mold growth and avoid associated health risks. Rent a wet and dry vacuum to remove standing water in your home if the area is less than 10 square feet and there is less than an inch of water. Protect yourself with the right equipment before coming into contact with contaminated water.
Wear safety goggles, gloves, boots, long sleeves, long pants, and a mask (such as an N-95 respirator). If standing water consumes an area of more than 10 square feet or there is more than an inch of water, call a water damage restoration company in your area for help. If you know how to check for mold and you've already noticed that some mold is growing, stop it. If it's a smaller area, such as 10 square feet or less, you can choose to clean it yourself.
Disinfect hard surfaces, such as baseboards and walls, with a cleaning solution made from 1.5 cups of fresh chlorine bleach in a gallon of water. Use protective equipment, such as a face mask and rubber gloves, while cleaning with this solution. Spray a solution of 10% fresh bleach in 90 percent water on any visible mold. To mitigate the severity of any allergic reaction, it is essential to eliminate mold as soon as possible and take steps to prevent it from reappearing.
Every mold infestation is different, so if your Central Florida home is damaged by water and mold, you need a customized solution. Working with mold removal professionals who know the safest and most efficient ways to get rid of mold can solve your problem permanently. Inadequate mold removal can result in thousands of dollars in repairs and mold remediation in the future, so it's best to leave this work to professionals. There are a number of precautions the homeowner can take to prevent the growth and spread of mold.
They forget water or moisture that could be trapped in walls or under floorboards, giving mold ample space to grow undetected. To avoid future mishaps, turn off the main water valve (and drain the pipes if you expect temperatures to drop below freezing) when you go on vacation. Mold can certainly cause damage to furniture or the structure of a building, such as ceilings, walls, and floors, if allowed to spread. If there are more than 10 square feet of mold in a building with 10 or more units, Local Law 55 requires the landlord to hire a mold evaluation company licensed in the State of New York and a mold remediation company licensed in the State of New York to fix the problem.
Mold grows in humid conditions, so water leaks from leaking water pipes often contribute to the growth and spread of mold. Remember that water conducts electricity and flood waters can contain bacteria, so coming into contact with it could be dangerous. Because mold tends to grow in areas that are humid or have high water consumption, the best places to check for mold are the bathroom, kitchen, laundry room and basement. The simple answer is that in order to correctly identify and eliminate mold, it's in your best interest to work with a professional company like Central Florida Restoration Solutions.
Most people don't realize that it's not just serious water damage, such as floods or a visible leak, that produces mold. .
Leave Message